How to maintain the mold？

1: After the die is used for a long time, the cutting edge must be grinded. After grinding, the cutting edge surface must be demagnetized and must not be magnetic, otherwise material blockage may occur. The mould using enterprises shall make detailed records and statistics of their use, care (lubrication, cleaning, rust prevention) and damage, so as to find out which parts and components have been damaged and the degree of wear, so as to provide information on finding and solving problems, as well as the molding process parameters of the mould and the materials used for the product, so as to shorten the trial run time of the mould and improve the production efficiency. Under the normal operation of the injection molding machine and mold, various properties of the mold shall be tested, and the size of the last molded plastic part shall be measured. Through this information, the existing state of the mold can be determined, and the damage of the cavity, core, cooling system and parting surface can be found. According to the information provided by the plastic part, the damage state of the mold and maintenance measures can be determined.

2: Springs and other elastic parts are most vulnerable to damage in the process of use, usually fracture and deformation. The method to be adopted is replacement. In the process of replacement, attention must be paid to the specification and model of the spring. The specification and model of the spring are confirmed by three items: color, outer diameter and length. Only when the three items are the same can the spring be replaced. The quality of imported spring is better.

3: During the use of the die, the punch is easy to break, bend and gnaw, and the punch sleeve is generally gnawed. The damage of the punch and the punch sleeve is generally replaced with parts of the same specification. Punch parameters mainly include working part size, installation part size, length size, etc.

4: Fasten the parts, check whether the fastening parts are loose or damaged, and replace the parts with the same specification.

5: Pressing parts such as pressing plate, Uri glue, etc., unloading parts such as stripper plate, pneumatic ejector, etc. During maintenance, check the relationship between parts and whether they are damaged, repair the damaged parts, check the pneumatic jacking material for air leakage, and take measures for specific conditions. Replace the air pipe if it is damaged. Focus on tracking and testing several important parts of the mold: the function of ejecting and guiding parts is to ensure the opening and closing movement of the mold and the ejecting of the plastic parts. If any part of the mold gets stuck due to damage, production will be stopped. Therefore, keep the lubrication of the mold thimble and guide pillar (the most appropriate lubricant should be selected), and regularly check whether the thimble and guide pillar have deformation and surface damage. Once found, they should be replaced in a timely manner; After a production cycle is completed, the working surface, moving and guiding parts of the mold shall be coated with professional antirust oil, especially the protection of the elastic strength of the parts with gears, rack mold bearings and spring molds, to ensure that they are always in the best working condition; With the continuous production time, the cooling channel is easy to deposit scale, rust, sludge and algae, which makes the section of the cooling channel smaller and the cooling channel narrower, greatly reducing the heat exchange rate between the coolant and the mold, and increasing the production cost of the enterprise. Therefore, attention should be paid to the cleaning of the channel; For the hot runner mold, the maintenance of the heating and control system is particularly important to prevent production failures.